eTraining Introduction

Specimen Preparation

Leica Ultracut UCT

Histology

JEOL JSM-6400 SEM

Hitachi S-4700 FE-SEM

Hitachi FB-2000A FIB

Microanalysis

Veeco Dim 3000 AFM

Fluorescence Microscopes

Support

Leica Ultracut UCT

Specimen Preparation Equipment Status

Overview

The ultramicrotome is an instrument commonly used to prepare TEM samples. It uses either a glass or diamond knife to cut ultra thin sections of specimens embedded in epoxy. The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width and can be stained and mounted onto TEM grids for viewing. The ultramicrotome is also used to create mirror-smooth surfaces on samples mounted in epoxy, the applications for which include secondary imaging on the SEM and nanoindentation. Preparation on smooth samples for surface analysis need not always be of samples that are embedded, as sometimes bulk will work.

Control Panel and Ultrmicrotome

Control Console and Ultramicrotome

Tools

Tools

Sample Block Shapes

Sample Block Shapes

View of Knife and Specimen through the Scope

View of Knife and Specimen through the Scope

Top of Page