eTraining Introduction

Specimen Preparation

Leica Ultracut UCT

Histology

JEOL JSM-6400 SEM

Hitachi S-4700 FE-SEM

Hitachi FB-2000A FIB

Microanalysis

Veeco Dim 3000 AFM

Fluorescence Microscopes

Support

Unloading

1. Close the S.C. AIRLOCK VALVE.    
2. Remove the HOLDER by pulling it straight out till it stops, then turn it a few degrees clockwise to the stop, then pull it straight out to the stop, then turn it counter-clockwise to the stop, then RELEASE THE HOLDER. Press the AIR button. Wait until you see the SEM SEC open and then gently pull the HOLDER free from the goniometer.    
3. Replace the PLUG.    

Top of Page